Home |   Last Articles |   Top Authors |   Submit Articles |   Rss Feeds |   Bookmark us |   Links Exchange |   Contact us
 

Most popular categories

 

Browse more categories

 
PARTNERS, SPONSORS & RESOURCES SITES









 
 
Articles about Home Improvement
 
  Hot Keywords : Domestic - Heating - Prices - Install a Jacuzzi - new jersey roofing companies - new jersey roofing contractors - fire pit plans - Bathroom Cabinets - Bedding Sets - building plans - locksmith skill - Cape Town South Africa - rodent control - Garden ornaments -   
 
Search for more Keywords :
 
<< Previous Article Home Improvement index Next Article >>
 
Why Isolate The Neutral In A Sub Panel?
 
The reason you need to isolate the neutral in a sub panel is that the neutral is the only ground in the service panel. There is nowhere else in your house where the white neutral conductor and the green bare ground conductor are connected. In a normal situation the grounding conductor does not carry any type of current. As a result, there is no voltage drop. If you would bond the ground and the neutral by the sub panel, any stray current can enter the equipment ground on any of the electrical items that are fed from this sub panel.

By isolating the ground and the neutral at the sub panel, the current goes to the main panel and finds its way to the service ground. You want to the equipment ground and the neutral at the main panel. If this sounds remotely confusing, you need to contact a skilled electrician or electrical contractor to do the work. If this is done the wrong way, you have a chance of damaging the main panel as well as your electrical items. It is also possible to cause a fire. Isolating the neutral in the sub panel is very important.

It is also important that you use the proper sub panel for this job. Any electrical work that you do not fully understand should never be attempted. If you do not understand what the neutral and the ground do, you could forget a step or do the work incorrectly. When working with any electrical work, you should be insured and licensed to complete the job correctly. In many states, you as the homeowner cannot do this type of work yourself. In some states, the homeowner can do the electrical, but in most cases should not. It is better to be safe and have the work done right by a professional electrician.
 
: Article-treasure.com
: 04-27-2010
 
Article by Andy Electrician
 
 
: electricians, electric contractors, local electricians, electrician directory, electric contractor directory
 
<< Previous Article Home Improvement index Next Article >>
Creation Site Internet EP Factory     service video gratuit